The Remote Virtual Console of the server is displayed, as shown in Figure 9-11.
Figure 9-11 The Remote Virtual Console of the server
l Logging In to a Server Using the Independent Remote Console (Mac)
a. Configure an IP address for the client (PC) to enable communication between the
client and the iBMC. That is, the IP address configured and the iBMC management
network port IP address must be in the same network segment.
b. Open the console, and set the folder, in which the independent remote console is
stored, as the working folder.
c. Run the chmod 777 KVM.sh command to set the permission for the independent
remote console.
d. Run ./KVM.sh to start the independent remote console. The independent remote
console interface is displayed, as shown in Figure 9-12.
5288 V3 Server
User Guide
9 Common Operations
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 256
To Next Page
Loading...
