Procedure
l Disable the boot option for an LSI SAS3108 controller card.
NOTE
The methods for disabling the boot options for the LSI SAS3108 controller card on the mainboard and
standard LSI SAS3108 controller card in a PCIe slot are the same.
1. In the power-on self-test (POST) phase of the server restart process, press Ctrl+R to
open the BIOS configuration screen.
Figure 9-19 POST screen
2. Select the boot option for the LSI SAS3108 controller card on the mainboard or standard
LSI SAS3108 controller card in a PCIe slot, and press Enter. See Figure 9-20.
Figure 9-20 Selecting a RAID controller card on the mainboard
3. Press Ctrl+N to open the Ctrl Mgmt screen. See Figure 9-21.
5288 V3 Server
User Guide
9 Common Operations
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 265
To Next Page
Loading...
