Figure 9-23 POST screen
2. Select the boot option for the LSI SAS3008 controller card on the mainboard or standard
LSI SAS3008 controller card in a PCIe slot, and press Enter. See Figure 9-24.
Figure 9-24 Selecting a RAID controller card on the mainboard
3. Select Boot Support. Then press the + or - key to change the value to Enabled OS only.
See Figure 9-25.
Figure 9-25 Setting Boot Support
5288 V3 Server
User Guide
9 Common Operations
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 267
To Next Page
Loading...
