Symbol Description
Calls attention to important information, best practices
and tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Change History
Changes between document issues are cumulative. The latest document issue contains all
changes made in previous issues.
Issue
Date Description
26 2018-11-19 Optimized the flexible NIC indicator description. For
details, see 2.4 Indicators and Buttons.
25 2018-10-19 Added the list of components where the sensors are
located. For details, see 11.3 Sensor List.
24 2018-09-17 Added the description about the information that will
be lost after mainboard replacement and needs to be
configured again after the mainboard is replaced.
Added the link for importing and exporting the BMC
configuration file to sections 7.42 Installing the
Mainboard and 7.41 Removing the Mainboard.
23 2018-08-17 Added the procedure for removing a holding rail. For
details, see 3.6 Removing the Server.
22 2018-07-12 Added procedures for removing and installing an SD
card and related precautions. For details, see 7.49
Removing an SD Card Board and 7.50 Installing
an SD Card Board.
21 2018-05-29 Changed LOM and NIC to flexible NIC.
20 2018-05-10 Modified fan module removal and installation
procedures. For details, see 7.15 Removing a Fan
Module and 7.16 Installing a Fan Module.
19 2018-04-10 Modified RAID controller card supercapacitor
removal and installation procedures. For details, see
7.33 Removing the Supercapacitor (RAID
Controller Card), 7.34 Removing the
Supercapacitor (Standard RAID Controller
Card), 7.35 Installing the Supercapacitor (RAID
Controller Card), 7.36 Installing the
Supercapacitor (Standard RAID Controller
Card).
5288 V3 Server
User Guide
About This Document
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. iii
To Next Page
Loading...
Need help?
General