Issue Date Description
18 2018-02-22 Added the description about how to import and
export the iBMC/BIOS configuration information
after the mainboard is replaced. For details, see 7.41
Removing the Mainboard and 7.42 Installing the
Mainboard.
17 2018-01-15 Added the locations of dual SD cards. For details,
see 7.47 Removing an SD Card.
Added the description about the left and right
mounting ears. For details, see 2.2 Appearance.
16 2017-12-12 Modified server installation environment
requirements. For details, see 3.2 Installation
Environment.
Added steps about removing and installing the
mezzanine SD card. For details, see 7.47 Removing
an SD Card and 7.48 Installing an SD Card.
Added fan module numbers. For details, see 7.15
Removing a Fan Module.
15 2017-10-26 Added the description about Dual-SD cards and SD
card module. For details, see 2.5 Physical
Structure.
14 2017-09-26 Modified the logical structure. For details, see 2.8
Logical Structure.
13 2017-08-15 Optimized chapters about parts replacement. For
details, see 7 Replacing Parts.
12 2017-07-20 Added the description about 128 GB DIMMs. For
details, see 2.5 Physical Structure and 2.11 Product
Specifications.
11 2017-06-20 Added internal cable BOMs. For details, see 2.7
Internal Cabling.
10 2017-05-10 Modified the mainboard layout description. For
details, see 2.6 Mainboard Layout.
09 2017-04-05 Modified front bezel description. For details, see 7.3
(Optional) Removing the Front Bezel and 7.4
(Optional) Installing the Front Bezel.
08 2017-03-03 Modified the indicator status description of NVMe
PCIe SSDs. For details, see 7.8 Installing an NVMe
PCIe SSD.
07 2017-01-24 Added operations for replacing the front bezel. For
details, see 7.3 (Optional) Removing the Front
Bezel and 7.4 (Optional) Installing the Front
Bezel.
5288 V3 Server
User Guide
About This Document
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. iv
To Next Page
Loading...
Need help?
General