l Signal cables for connecting the rear 12-bay hard disk backplane to the front hard disk
backplane when the 5288 V3 is equipped with a single RAID controller card
Figure 2-14 Signal cables to the rear 12-bay hard disk backplane (single RAID
controller card)
No.
Description BOM Number
1 SAS cable (Port A-Port A) for connecting the rear
12-bay hard disk backplane to the front hard disk
backplane
04050433
2 SAS cable (Port B-Port B) for connecting the rear
12-bay hard disk backplane to the front hard disk
backplane
04050433
3 SAS cable (Port C-Port C) for connecting the rear
12-bay hard disk backplane to the front hard disk
backplane
04050433
4 Signal cable for connecting the rear 12-bay hard disk
backplane (J1) to the front hard disk backplane (J36)
04051053
l The rear 12-bay hard disk backplane is connected to the standard RAID controller card
in a PCIe slot using SAS cables when the 5288 V3 is equipped with dual RAID
controller cards. This topic assumes that a standard RAID controller card is installed in a
PCIe x8 slot on the mainboard.
5288 V3 Server
User Guide
2 Product Overview
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 34
To Next Page
Loading...
