Figure 3-33 Removing the server
2. Pull out the server along the guide rails away from the cabinet. See (2) in Figure 3-33.
3. Place the removed server on an ESD platform.
Step 5 Loosen the four screws on the guide rail. See (1) in Figure 3-34.
Step 6 Shorten the guide rail and take it out. See (2) in Figure 3-34.
Figure 3-34 Removing an adjustable guide rail
Step 7 Remove the other guide rail on the opposite side in the same way.
----End
5288 V3 Server
User Guide
3 Installing and Removing the 5288 V3
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 83
To Next Page
Loading...
