Figure 3-38 Removing a holding rail
2. Push the holding rail out of the square holes. See (3) in Figure 3-38.
3. Remove the front end of the holding rail. See (4) in Figure 3-38.
4. Push the plate into the holding rail. See (5) in Figure 3-38.
5. Remove the rear end of the holding rail.
Lift the positioning pin and remove the holding rail from the square holes. See (6) and
(7) in Figure 3-38.
5288 V3 Server
User Guide
3 Installing and Removing the 5288 V3
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 87
To Next Page
Loading...
