Huawei FusionModule2000 - Page 47

Item Method Expected Result Troubleshooting
Availability
of the fusion
module
actuator
1. On the
ECC800-Pro
WebUI, choose
Monitoring >
Aisle > Fusion
Module
Actuator
Group >
Fusion
Module
Actuator >
Running
Parameters,
set Lighting
Control Mode
to Manual,
and click
Submit.
2. On the
ECC800-Pro
WebUI, choose
Monitoring >
Aisle > Fusion
Module
Actuator
Group >
Fusion
Module
Actuator. On
the Running
Control page,
control the
lights.
NOTE
After checking the
fusion module
actuator, set
Lighting Control
Mode to the
status before the
modication.
The fusion module
actuator controls
the lights in the
aisle of the smart
module.
If lights cannot be
switched on or o,
check whether the AC
power cables
connected to the
lights are loose. If so,
reconnect the cables.
Otherwise, replace
the fusion module
actuator.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 3 Routine Maintenance
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 40