Huawei FusionModule2000 - Page 52

Item Method Expected Result Troubleshooting
● Steady green: The
LAN switch is not
running properly
or is starting.
● Steady orange:
The indicator is
under a self-test
during the startup.
● Steady red: The
switch does not
run properly after
being registered,
or alarms are
generated for the
power supply, fan,
or temperature.
Availability
of the RF_Z
antenna
Check the
communication
status of the
fusion module
actuator.
The fusion module
actuator
communicates
properly.
If the communication
status is abnormal,
check whether the
antenna is shielded. If
so, install the
antenna in a
dierent
position. If not,
replace the antenna.
Availability
of the 4G
antenna
After an alarm is
simulated, the
phone number
bound on the
WebUI can
receive the alarm
notication.
An alarm
notication is
received.
If the communication
status is abnormal,
check whether the
antenna is shielded. If
so, install the
antenna in a
dierent
position. If not,
replace the antenna.
Availability
of the
cabinet
temperature
sensor
Hold the probe of
the cabinet
temperature
sensor or T/H
sensor in your
hand and view
the temperature
of the rack
environment unit
on the WebUI.
The temperature of
the rack
environment unit or
T/H sensor
displayed on the
WebUI increases.
If the temperature
displayed is
abnormal, check
whether the cable to
the cabinet
temperature sensor is
properly connected.
Otherwise, replace
the cabinet
temperature sensor.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 3 Routine Maintenance
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 45