No. Parameters Note
3 Active/Standby Active: properly responds to the requirement
control.
Standby: responds to the requirement control
when Active is faulty (critical alarms,
shutdown, and oine) or Active cannot meet
cooling requirements.
4 Frame: green/non-
green
A device with green frame indicates the
device itself, as shown in .
A non-green frame indicates the other device
in the group, as shown in .
5 Ground color: red,
bright gray, dark
gray
Red indicates that a critical alarm is
generated, as shown in .
Bright gray indicates that the device is
operating without any critical alarms, as
shown in
.
Dark gray indicates that the device is o-line,
as shown in .
----End
Example
Figure 4-13 shows how to congure 16 smart cooling products as two CAN
teamwork groups, each group containing eight smart cooling products.
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width) 4 ACC Introduction
Issue 17 (2020-10-22) Copyright © Huawei Technologies Co., Ltd. 103
To Next Page
Loading...
