Huawei S1720 Series Configuration Guide

------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 6 Routes : 6
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.0/24 Direct 0 0 D 1.1.1.1 Vlanif10
1.1.1.1/32 Direct 0 0 D 127.0.0.1 Vlanif10
1.1.1.255/32 Direct 0 0 D 1.1.1.2 Vlanif10
2.2.2.0/24 Static 60 0 RD 1.1.1.2 Vlanif10
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
# Run the shutdown command on VLANIF 10 of Switch B to simulate a link fault.
[SwitchB] interface vlanif 10
[SwitchB-Vlanif10] shutdown
# Check the routing table on Switch A, and you can find that default route 2.2.2.0/24 does not
exist. The reason is that the default static route is bound to a BFD session, and BFD immediately
notifies that the bound static route is unavailable when a fault is detected.
<SwitchA> display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.0/24 Direct 0 0 D 1.1.1.1 Vlanif10
1.1.1.1/32 Direct 0 0 D 127.0.0.1 Vlanif10
1.1.1.255/32 Direct 0 0 D 1.1.1.2 Vlanif10
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
# Run the undo shutdown command on VLANIF 10 of Switch B to simulate link recovery.
[SwitchB-Vlanif10]undo shutdown
# Check the routing table on Switch A, and you can find default route 2.2.2.0/24 in the routing
table. After BFD detects link recovery, it immediately notifies that the bound static route is
reachable.
<SwitchA> display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 6 Routes : 6
Destination/Mask Proto Pre Cost Flags NextHop Interface
1.1.1.0/24 Direct 0 0 D 1.1.1.1 Vlanif10
1.1.1.1/32 Direct 0 0 D 127.0.0.1 Vlanif10
1.1.1.255/32 Direct 0 0 D 1.1.1.2 Vlanif10
2.2.2.0/24 Static 60 0 RD 1.1.1.2 Vlanif10
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 1 IP Static Route Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm