EasyManuals Logo

Huawei S1720 Series Configuration Guide

Huawei S1720 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #661 background imageLoading...
Page #661 background image
[MCE] interface xgigabitethernet 0/0/1
[MCE-XGigabitEthernet0/0/1] port link-type trunk
[MCE-XGigabitEthernet0/0/1] port trunk allow-pass vlan 30 40
[MCE-XGigabitEthernet0/0/1] quit
[MCE] interface xgigabitethernet 0/0/3
[MCE-XGigabitEthernet0/0/3] port link-type trunk
[MCE-XGigabitEthernet0/0/3] port trunk allow-pass vlan 10
[MCE-XGigabitEthernet0/0/3] quit
[MCE] interface xgigabitethernet 0/0/4
[MCE-XGigabitEthernet0/0/4] port link-type trunk
[MCE-XGigabitEthernet0/0/4] port trunk allow-pass vlan 20
[MCE-XGigabitEthernet0/0/4] quit
# Create sub-interfaces on PE2 and add these sub-interfaces to the VLAN.
<Quidway> system-view
[Quidway] sysname PE2
[PE2] interface gigabitethernet 1/0/1.1
[PE2-GigabitEthernet1/0/1.1] vlan-type dot1q 30
[PE2-GigabitEthernet1/0/1.1] quit
[PE2] interface gigabitethernet 1/0/1.2
[PE2-GigabitEthernet1/0/1.2] vlan-type dot1q 40
[PE2-GigabitEthernet1/0/1.2] quit
# Create a VLAN on CE3.
<Quidway> system-view
[Quidway] sysname CE3
[CE3] vlan 10
# Add an interface to the VLAN on CE3.
[CE3-A] interface xgigabitethernet 0/0/1
[CE3-XGigabitEthernet0/0/1] port link-type trunk
[CE3-XGigabitEthernet0/0/1] port trunk allow-pass vlan 10
[CE3-XGigabitEthernet0/0/1] quit
# Create a VLAN on CE4.
The configuration on CE4 is similar to that on CE3, and is not mentioned here.
# Add an interface to the VLAN on CE4.
The configuration on CE4 is similar to that on CE3, and is not mentioned here.
2. Create and configure VPN instances.
# Create VPN instances on the MCE.
[MCE] ip vpn-instance vpna
[MCE-vpn-instance-vpna] route-distinguisher 100:1
[MCE-vpn-instance-vpna] quit
[MCE] ip vpn-instance vpnb
[MCE-vpn-instance-vpnb] route-distinguisher 100:2
[MCE-vpn-instance-vpnb] quit
# Bind VPN instances to VLANIF interfaces on the MCE and assign IP addresses to the
VLANIF interfaces.
[MCE] interface vlanif 10
[MCE-Vlanif10] ip binding vpn-instance vpnb
[MCE-Vlanif10] ip address 192.168.1.1 24
[MCE-Vlanif10] quit
[MCE] interface vlanif 20
[MCE-Vlanif20] ip binding vpn-instance vpna
[MCE-Vlanif20] ip address 192.168.2.1 24
[MCE-Vlanif20] quit
[MCE] interface vlanif 30
[MCE-Vlanif30] ip binding vpn-instance vpnb
[MCE-Vlanif30] ip address 172.18.1.2 16
[MCE-Vlanif30] quit
[MCE] interface vlanif 40
[MCE-Vlanif40] ip binding vpn-instance vpna
[MCE-Vlanif40] ip address 172.19.1.2 16
[MCE-Vlanif40] quit
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 11 MCE Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
642

Table of Contents

Other manuals for Huawei S1720 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei S1720 Series and is the answer not in the manual?

Huawei S1720 Series Specifications

General IconGeneral
Operating Humidity5% to 95% (non-condensing)
Uplink Ports4 x GE combo ports
VLANs4094
Power SupplyAC 100-240V, 50/60Hz
Layer 2 FeaturesVLAN
Layer 3 FeaturesStatic routing
ManagementSNMP
Operating Temperature0°C to 45°C
Storage Temperature-40°C to +70°C
Dimensions (W x D x H)442 mm x 220 mm x 43.6 mm

Related product manuals