Huawei SmartAX MA5608T Hardware Description

NOTICE
l When cables from the PSTN and LINE ports are routed to an outdoor environment, the
MDF must be installed with a protective unit.
l When cables from the LINE port are routed to the user side, the MDF must be installed
with a protective unit.
l The PSTN port must be connected to an MDF with a protective unit or a POTS device.
Otherwise, when the LINE port is struck by lightning, energy inside the SPL board or unit
fluctuates and overlaps, which may damage the LINE port.
Pin Assignments
Table 3-204 describes the pin assignments of the xDSL port of the H801VSTH board. The
H801VSTH board uses only the first 24 channels of signals.
Table 3-204 Pin assignments of the xDSL port
Pin
Signa
l
Pin Signa
l
Port Pin Signa
l
Pin Signa
l
64 31 48 23
64
48
32
16
1
17
33
49
32 15 16 7
63 47 31 15
62 30 46 22 30 14 14 6
61 45 29 13
60 29 44 21 28 13 12 5
59 43 27 11
58 28 42 20 26 12 10 4
57 41 25 9
56 27 40 19 24 11 8 3
55 39 23 7
54 26 38 18 22 10 6 2
53 37 21 5
52 25 36 17 20 9 4 1
51 35 19 3
50 24 34 16 18 8 2 0
49 33 17 1
Pin assignments for the LINE port and that for the PSTN port are the same, as described in
Table 3-205. The H801VSTH board uses only the first 24 channels of signals.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
807

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE