Huawei TE20 - Management Layer Security

TE20 Videoconferencing Endpoint
Administrator Guide
10 Security Maintenance
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98
Figure 10-7 TE20 security network
Over the network:
On this network, the endpoint is connected to the Multipoint Control Unit (MCU) through the
private network, which connects to different networks through different ports. The endpoint
on the private or public network can join the conference even if the call protocol or the
firewall settings (such as enabled ports) are not changed.
10.5 Management Layer Security
To ensure management layer security, you are advised to comply with security principles and
suggestions for system maintenance, log recording, signaling diagnosis, security assessment,
touch panel hardening, data backup, defect feedback, attack defense, and security emergency
response.