TE20 Videoconferencing Endpoint
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.2 Backing Up Settings
The administrator can use the One-Click Backup function to create a configuration backup
file for your endpoint. If some parameter settings under System Settings are inadvertently
deleted or changed, you can use this backup file to restore all settings under System Settings
to the pre-backup settings.
Background
If a configuration backup file is already stored on your endpoint, a new configuration backup
file will replace the original one.
Procedure
Step 1 Choose System Settings > Installation.
The Installation page is displayed.
Step 2 Click One-Click Backup.
Step 3 On the One-Click Backup page, click Back Up Settings.
Your endpoint then starts to create a configuration backup file. When the backup is complete,
a notification message is displayed.
----End
Follow-up Procedure
To restore all settings under System Settings to the pre-backup settings, click Restore
Backup Settings. Your endpoint will then restart and restore the settings.
7.3 Creating and Downloading a CSR File
You can create and export a Certificate Signing Request (CSR) file from the endpoint web
interface.
Prerequisites
The local private key password file has been imported.
Background
You can send the CSR file to a certification organization to generate an authentication
certificate for your endpoint.
Procedure
Step 1 Choose System Settings > Installation.
The Installation page is displayed.
Step 2 Click Export CSR File.
To Next Page
Loading...
