Huawei TE20 - Checking the System Information

TE20 Videoconferencing Endpoint
Administrator Guide
9 Routine Maintenance
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
72
Background

Line status information includes: IPv4, IPv6, network port model, WLAN IP address,
Whether to use GK and H.323 site numbers, Whether to use SIP site numbers, running
time, and cloud platform activation and subscription status.

Input port status information includes: built-in camera, PC IN port, USB port, and
wireless connection status of presentation streams.
Checking the Line Status
To check the line status, perform the following steps:
Step 1 Log in to the endpoint web interface as the administrator.
Step 2 Choose Maintenance > System Status.
The System Status page is displayed.
Step 3 Click the Line Status tab.
Check line status information.
Step 4 If any exception is found, tackle it in time.
----End
Checking the Input Port Status
To check the input port status, perform the following steps:
Step 1 Log in to the endpoint web interface as the administrator.
Step 2 Choose Maintenance > System Status.
The System Status page is displayed.
Step 3 Click the Input Interface Status tab.
Check input port status information.
Step 4 If any exception is found, tackle it in time.
----End
9.8 Checking the System Information
To ensure that your endpoint runs properly, check its system information regularly.
Background
Regularly check the system information of the endpoint to know its conference resources and
capabilities, facilitating appropriate allocation of conference resources.
Procedure
Step 1 Log in to the endpoint web interface as the administrator.