Huawei TE20 - Backup and Restoration

TE20 Videoconferencing Endpoint
Administrator Guide
9 Routine Maintenance
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
Step 2 Choose Maintenance > System Information.
The System Information page is displayed.
Step 3 Table 9-5describes the items to be checked.
Table 9-5 Items to check
Item
Task
Audio
The audio codec capability works properly.
Video
The video codec capability works properly.
Interface/Bandwidth

Check network interfaces supported by the endpoint.

Check the maximum network bandwidth supported by each
interface.
SIP
Check whether the device supports SIP-based communication.
Dual stream
Check whether the device supports dual-stream calls.
H.235 Encryption
Check whether the device supports H.235 encryption.
Wi-Fi
Check whether the device supports Wi-Fi access.
Maximum
presentation
resolution
Check the maximum presentation resolution of the device.
Maximum encoding
capacity
Check the maximum encoding capability of the device.
Maximum encoding
capacity
Check the maximum decoding capability of the device.
MAC address
Check the MAC address of the device.
Electronic label
Check the unique identifier of the device.
Zoom level
Check the zoom level of the device.
----End
9.9 Backup and Restoration
Regularly back up the system configuration file of the endpoint and use the backup file to
restore the system after an exception occurs.
Background

You can use the One-Click Backup function to create a backup file for the endpoint.

•If a configuration backup file is already stored on your endpoint, the new backup
configuration file will overwrite the original one.