Huawei TE20 - View Site

TE20 Videoconferencing Endpoint
Administrator Guide
3 Conference Operations Using the Remote Control
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25
Figure 3-10 Conference control
Step 2 Press the button on the remote control, switch to or , and press the button
on the remote control to mute or unmute the microphone.
----End
3.3.7 View Site
Application Scenario
At your site, you can view continuous presence consisting of multiple sites or view a single
site. This operation does not affect the video viewed by other sites.
Procedure
Step 1 On the Site List screen shown in Figure 3-6, press the button on the remote control,
switch to a conference site, and press the button on the remote control.
The conference control page is displayed, as shown in Figure 3-10.
Step 2 Press the button on the remote control, switch to , and press the on the remote
control.
Watch the video from the conference site.
If Continuous Presence Settings is set to Local Presentation, View Site does not take effect.
----End