Huawei TE20 - C Default Accounts

TE20 Videoconferencing Endpoint
Administrator Guide
C Default Accounts
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
C Default Accounts
To better use your endpoint, get to know the default values of common user names and
passwords, default IP addresses.
To ensure account security, you are advised to change the password at the first login and regularly
change the password afterward.
Table C-1 lists the default user names and passwords for the endpoint.
Table C-1 Default user names and passwords
Item
Default Setting
Administrator password for the remotely
controlled UI
12345678.
Administrator user name and password for the
endpoint web interface
The default user name and password are
admin and Change_Me respectively.
User name and password for connecting the
third party (for example, a touch panel or
SMC2.0) to the endpoint
The default user name and password are
api and Change_Me respectively.
User name and password for logging in to the
endpoint in SSH/Telnet mode

Common user: The default user
name and password are admin and
Change_Me respectively.

Test user: The default user name and
password are test and Change_Me
respectively.
Upgrade password
Change_Me.
Default IP address after the endpoint is restored
to its default settings
192.168.1.1.
Account, password,
and protocol required
for the network
management system
to connect to the
User name
v3user.
User rights
Read and write.
Authentication
protocol
SHA.