Huawei TE20 - Joining a Conference; Joining a Conference by Entering the Conference Access Code

TE20 Videoconferencing Endpoint
Administrator Guide
3 Conference Operations Using the Remote Control
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
Figure 3-2 Conference history
Step 2 On the remote control, press the button, and switch to a conference site in the history.
Step 3 On the remote control, press the button to start a conference.
----End
3.2 Joining a Conference
You can use your remote control to join SMC-based, IMS-based HD, and third-party cloud
video conferences.
3.2.1 Joining a Conference by Entering the Conference Access
Code
Prerequisites

You have obtained the conference access number and password (optional) from the
conference convener.

You have set SIP parameters. For details, see TE20 Videoconferencing Endpoint
V500R003C00 Configuration Guide.
Procedure
Step 1 On the main menu, press any number key on the remote control.
The Speed Dial page is displayed, as shown in Figure 3-1.
Step 2 In the text box, enter the conference access number.