TE20 Videoconferencing Endpoint
3 Conference Operations Using the Remote Control
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Using the Name, Number, or IP Address of a Remote Site
Step 1 In the text box on the Speed Dial screen shown in Figure 3-1, enter the name, number, or IP
address of a remote site.
Step 2 Press the button on the remote control, switch to , and press the on the remote
control to start the conference.
----End
Speed Dial
Before placing a call via the address book, create an address book on the web interface by referring to 6
Address Book Management.
Step 1 On the Speed Dial screen shown in Figure 3-1, press the button on the remote control,
and switch to a conference site in the address book.
If a group is saved in the address book, you need to switch to a conference site under the
group.
Step 2 On the remote control, press the button to start a conference.
----End
Placing a Call from Your History
The conference history contains the records of conferences your endpoint initiated or attended
and sites your endpoint placed calls to or received calls from.
Step 1 On the Speed Dial screen shown in Figure 3-1, press the button on the remote control,
and switch to .
The Conference History page is displayed, as shown in Figure 3-2.
To Next Page
Loading...
