Huawei TE20 - Starting Presentation

TE20 Videoconferencing Endpoint
Administrator Guide
4 Conference Operations Using the Web Interface
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49
----End
4.4 Starting Presentation
To share the content on a computer, connect your computer to the endpoint. During
presentation sharing, remote sites can watch the content shared on your computer screen.
Prerequisites
The presentation function is enabled, and the presentation parameters are set correctly. The
endpoint has the presentation function enabled by default. The default presentation parameters
are able to start presentation. If you want to set the presentation parameters based on you
actual needs, see the TE20 Videoconferencing Endpoint V500R003C00 Configuration Guide.
The presentation source has been connected.
The AirPresence client is unavailable when you are using the remote desktop.
The AirPresence client can run on a Windows or Mac computer.

The following 32- and 64-bit Windows operating systems are supported:
− Windows XP
− Windows Vista
− Windows 7
− Windows 8
− Windows 10

The following 32- and 64-bit Mac operating systems are supported:
− OS X 10.7
− OS X 10.8
− OS X 10.9
− OS X 10.10
− OS X 10.11
Procedure

Wired connection
Use a cable to connect the computer to a video input port on the endpoint.endpoint.
Step 1 Click Conference > Share Presentation. The Share Presentation dialog box is displayed.
Step 2 Click Share.
To stop presentation sharing, click Stop.
----End

AirPresence Client Connection
Step 1 In the computer browser address box, enter the endpoint IP address and press Enter.
Step 2 On the login page, click Download AirPresence Client and install the client as prompted.