Huawei TE20 - Broadcast Site; Disconnect Site; End Conference

TE20 Videoconferencing Endpoint
Administrator Guide
3 Conference Operations Using the Remote Control
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26
3.3.8 Broadcast Site
Application Scenario
When a site is broadcast, all non-chair sites (excepting the site being broadcast) are limited to
viewing the broadcast site while the chair site can view any site in the conference.
The chair site can broadcast any of the participant sites (except for an audio-only site) in a
conference and broadcast multiple sites (including the chair site) in turn at preset intervals.
Procedure
Step 1 On the Site List screen shown in Figure 3-6, press the button on the remote control,
switch to a conference site, and press the button on the remote control.
The conference control page is displayed, as shown in Figure 3-10.
Step 2 Press the button on the remote control, switch to or , press the button on
the remote control to start Broadcast Site or Stop Broadcast.
----End
3.3.9 Disconnect Site
Application Scenario
The chair site can disconnect a site from an ongoing conference. The site then automatically
exits the conference. The disconnected site still belongs to the conference. The chair site can
invite the site to the conference again using the Call Site function.
Procedure
Step 1 On the Site List screen shown in Figure 3-6, press the button on the remote control,
switch to a conference site, and press the button on the remote control.
The conference control page is displayed, as shown in Figure 3-10.
Step 2 Press the button on the remote control, switch to , and press the on the remote
control.
Step 3 Press the button as prompted on the remote control.
----End
3.4 End Conference
Application Scenario
The chair site can end a conference as required.