Huawei TE20 - Call Site

TE20 Videoconferencing Endpoint
Administrator Guide
3 Conference Operations Using the Remote Control
Issue 01 (2016-09-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
Figure 3-8 Speed dial
Step 2 Press the button on the remote control and switch to the text box or address book list.

In the text box, enter the number or IP address of a site you want to add.

In the address book list, select a site or group you want to add.
Step 3 Press the button on the remote control, switch to , and press the on the remote
control.
----End
3.3.5 Call Site
Application Scenario
You can place a call to a site that is not in the conference. The site joins the conference after
answering the call.
Procedure
Step 1 On the Site List screen shown in Figure 3-6, press the on the remote control.
Step 2 Press the button on the remote control, switch to a site that has not joined the conference,
and press the on the remote control.
The Call Site page is displayed, as shown in Figure 3-9.