Hughes Network Systems GMH2000 - Page 85

8018653 1.1 Troubleshooting • 4-5
Start
Write the Error Code on the
malfunction report, then refer
to chapter 5, "Maintenance,"
section "Replacing BSC
circuit modules" to replace
the defective module.
Flowchart 4-3. E1 or T1 module failed SUDs
Start
Write the Error Code on the
malfunction report, then refer
to chapter 5, "Maintenance,"
section "Replacing BSC
circuit modules" to replace
the defective module.
Flowchart 4-4. CPM or STM failed SUDs