– Power supplies (2)
– Power cables (2 jumper line cords)
– Rack installation hardware kit:
- Support rails (2) (right and left assembly)
- M5 black hex-head slotted screws (8)
- M5 Washers (6)
- Small diameter spacers (8) (these come installed, four in each rail)
- Large diameter spacers (8)
- M4 pan-head screws (2)
v Printed documents:
– IBM System Storage DS3500 and EXP3500 Rack Installation and Quick Start Guide
v Online documents:
– IBM System Storage DS3500 and EXP3500 Storage Subsystem Installation, User's,
and Maintenance Guide (this document)
– IBM Systems Safety Notices
All documents are available on the IBM Documentation CD or from the IBM
support Web site at http://www.ibm.com/servers/storage/support/.
Installing the EXP3500 storage enclosure in a rack
You can install the EXP3500 storage subsystem in an Electronic Industries
Association (EIA) 310 standard rack. For complete rack installation instructions, see
IBM System Storage DS3500 and EXP3500 Rack Installation and Quick Start Guide.
30 IBM System Storage DS3500 and EXP3500 Storage Subsystem: Installation, User's, and Maintenance Guide
To Next Page
Loading...
Need help?
General