Step 1322-16
Remove all entries in the list of all partition(s) you recorded in “Step 1322-11” on page 101. If you are
referred to the list of partition(s) obtained in “Step 1322-11” on page 101 in future steps, the list is empty.
Go to “Step 1322-17”.
Step 1322-17
Select and highlight the service action event from the “Error Associated With This Serviceable Event”
window.
Step 1322-18
Click Close Event.
Step 1322-19
Add comments for the serviceable event. Include any unique additional information. Click OK.
Step 1322-20
The following steps will add or update FRU information.
Step 1322-21
Did you replace, add, or modify a FRU of the open service action event?
No Go to “Step 1322-23”.
Yes Go to “Step 1322-22”.
Step 1322-22
From the FRU list, select a FRU that you need to update. Double-click on the FRU, and update the FRU
information. Go to “Step 1322-24”.
Step 1322-23
Select the No FRU Replaced for this Serviceable Event option.
Step 1322-24
Click OK to close the service action event.
Step 1322-25
Is the list of all partition(s) you recorded in “Step 1322-11” on page 101 empty?
No Go to “Step 1322-26”.
Yes Go to “Step 1322-33” on page 103.
Step 1322-26
Does the list of all partition(s) you recorded in “Step 1322-11” on page 101 contain more than one
entry?
No Go to “Step 1322-33” on page 103.
Yes Go to “Step 1322-27” on page 103.
102 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
To Next Page
Loading...
Need help?
General