Checkpoint Description Action/
Possible Failing FRU
94B0 Wire test faulty driver status refcode See note 2 on page 167.
94B1 Wire test shorted net status refcode See note 2 on page 167.
94B2 Wire test elastic interface test See note 2 on page 167.
94BB Wire test starting See note 2 on page 167.
9501 IPL diagnostic initialization See note 2 on page 167.
9502 IPL diagnostic L3 cache march test See note 2 on page 167.
9503 IPL diagnostic L3 connections test See note 2 on page 167.
9504 IPL diagnostic L2 cache march test See note 2 on page 167.
9505 IPL diagnostic RIO wrap test See note 2 on page 167.
9506 IPL diagnostic cleanup See note 2 on page 167.
9507 IPL diagnostic test See note 2 on page 167.
9508 IPL diagnostic main storage march test See note 2 on page 167.
9509 IPL diagnostic main storage connections
test
See note 2 on page 167.
950A IPL diagnostic elastic interface slack test See note 2 on page 167.
950B IPL diagnostic fast initialization to zeros See note 2 on page 167.
96C2 IPL MOPs processor configuration See note 2 on page 167.
96C3 IPL MOPs main storage size See note 2 on page 167.
96C4 IPL MOPs main storage configuration See note 2 on page 167.
96C6 IPL MOPs I/O configuration See note 2 on page 167.
96C7 IPL MOPs: enable chip machine checks See note 2 on page 167.
96E1 Initialize run-time PRD objects and memory See note 2 on page 167.
96E2 Run-time initialization: enable attention
handling
See note 2 on page 167.
99FD Service processor receiving firmware
update module
See note 2 on page 167.
Attention: This checkpoint may stay in
the operator panel for some period of time
during a firmware update or hypervisor
dump with no indication of activity. Do not
assume that the service processor is hung
unless this checkpoint has been in the
operator panel for at least 15 minutes. with
no indication of activity.
Attention: Do not remove power from the
system, or reset the service processor,
during a firmware update or hypervisor
dump.
Chapter 4. Checkpoints 165
To Next Page
Loading...
Need help?
General