Table 3. SPCN Error Codes for I/O Subsystems (continued)
Error Code Description Action/
Possible Failing FRU
1nn1 840D I/O type mismatch
1. Check the RIO and the SPCN cabling.
2. Set the I/O type using the service processor
menus.
3. I/O subsystem backplane, U0.dd-P1.
1nn1 840E I/O type mismatch
1. Check the RIO and the SPCN cabling.
2. Set the I/O type using the service processor
menus.
3. I/O subsystem backplane, U0.dd-P1.
1nn1 8A00 The power controlling the CEC changed Informational message
1nn1 C62E Polling error I/O subsystem backplane, U0.dd-P1.
Chapter 5. Error Code to FRU Index 225
To Next Page
Loading...
