Appendix A. Product Specifications
This appendix provides technical specifications and includes the following sections:
• “Switch Specifications” on page 135
• “Power Specifications for the IBM c-type SAN Director” on page 138
• “SFP+ Transceiver Specifications” on page 144
Note: Specifications for cables and connectors are provided in Appendix B, “Cable and Port
Specifications,” on page 151.
Switch Specifications
• “SAN768C-6 Director Specification” on page 135
• “SAN384C-6 Director Specification” on page 135
• “SAN192C-6 Director Specification” on page 136
Table 16 on page 135 lists the environmental specifications for the IBM c-type SAN Directors.
Description Specification
Temperature, certified for operation 32 to 104° F (0 to 40° C)
Temperature, ambient non-operating and storage 40 to 158° F (û40 to 70° C)
Humidity (RH), ambient (non-condensing) operating 10 to 90%
Humidity (RH), ambient (non-condensing) non-
operating and storage
10 to 95%
Altitude, certified for operation 197 to 6500 ft (60 to 2000 m)
Table 16. Specifications for the IBM c-type SAN Directors
SAN768C-6 Director Specification
Table 17 on page 135 lists the physical specifications for the SAN768C-6 Director Director.
Description Specification
Dimensions (HxWxD) 26 rack units (26 RU) 45.25 x 17.3 x 35 in. (114.9 x 43.9 x
88.9 cm)
Weight Chassis (includes fans): 300 lb (136 kg)
Airflow 700 (LFM) average system velocity and between 40 and 160
cubic feet per minute (CFM) total flow through each line-card
slot depending on the line-card type and fan-speed setting
Table 17. Specifications for the SAN768C-6 Director Director
SAN384C-6 Director Specification
Table 18 on page 136 lists the physical specifications for the SAN384C-6 Director.
©
Copyright IBM Corp. 2019, 2021 135
To Next Page
Loading...
