IBM SAN192C-6 - Maximum Environmental and Electrical Ratings for Fibre Channel SFP+ Transceivers; Specifications for 8 Gbps Fibre Channel SFP+ Transceivers

Average Transmit Power
(dBm)
Average Receive Power
(dBm) Fiber Loss Budget (dBm)
SFP
Maximum Minimum Maximum Minimum
62.5microns
50.0
microns
[OM2]
50.0
microns
[OM3]
FC 8Gb LW
SFP+
û3 (2 Gbps)
û1 (4 Gbps)
+0.5 (8
Gbps)
û11.7 (2
Gbps)
û8.4 (4
Gbps)
û8.4 (8
Gbps)
û3 (2 Gbps)
û1 (4 Gbps)
+0.5 ( 8
Gbps)
- 7.8 (2 Gbps)
7.8 (4 Gbps)
6.4 (8 Gbps)
FC 8 Gb LC
40 Km SFP+
4 - 47 14.1 - 10.9 - -
Table 41. Specification for 8 Gbps Fibre Channel SFP+ Transceivers (continued)
Table 42 on page 150 provides the environment specification for the 8 Gbps Fibre Channel SFP+
transceivers.
Operating Storage
SFP+ Maximum Minimum Maximum Minimum
FC 8Gb SW SFP+ 40° C 0° C 85° C -40° C
FC 8Gb LW SFP+ 40° C 0° C 85° C -40° C
FC 8 Gb LC 40 Km SFP+ 40° C 0° C 85° C -40° C
Table 42. Specifications for 8 Gbps Fibre Channel SFP+ Transceivers
For information about safety, regulatory, and standards compliance, refer to IBM Systems Safety Notices.
Maximum Environmental and Electrical Ratings for Fibre Channel SFP+
Transceivers
Table 43 on page 150 provides the maximum environmental and electrical ratings for Fibre Channel SFP
+ transceivers.
Parameter Symbol Min. Max.) Unit Notes
Storage temperature T
S
-40 85 ° C 1
Case temperature T
C
0 70 ° C 1, 2
Relative humidity RH 5 95 % 1
Table 43. Maximum Environmental and Electrical Ratings for Fibre Channel SFP+ Transceivers
For information about safety, regulatory, and standards compliance, refer to IBM Systems Safety Notices
150IBM Storage Networking SAN192C-6, SAN384C-6 and SAN768C-6: SAN192C-6, SAN384C-6 and
SAN768C-6 Installation, Service, and User Guide