IBM SAN192C-6 - Specification for 16 Gbps Fibre Channel SFP+ Transceivers; Environmental Specifications for 16 Gbps Fibre Channel SFP+ Transceivers; General Specifications for 8 Gbps Fibre Channel SFP+ Transceivers

Average Transmit Power (dBm) Average Receive Power (dBm) Fiber Loss Budget (dBm)
SFP+
Maximum Minimum Maximum Minimum (62.5 microns
[OM1])
(50.0 microns
[OM2])
(50.0 microns
[OM3])
FC 16Gb SW
SFP+
-1.3 -7, 8 0 -10.3 2.08 (4Gbps)
1.68 (8Gbps)
1.63
(16Gbps)
2.08 (4Gbps)
1.68 (8Gbps)
1.63 (16Gbps)
2.88 (4Gbps)
1.04 (8Gbps)
1.86
(16Gbps)
FC 16Gb
10km LW SFP
+
1.3 -5.0 2.0 -10.0 7.8 (4Gbps)
6.4 (8Gbps)
6.4 (16Gbps)
- -
FC 16Gbps
Fibre
Channel ELW
SFP+
5 -2.0 2.0 -14.0 10 (16 Gbps) - -
Table 38. Specification for 16 Gbps Fibre Channel SFP+ Transceivers
Table 39 on page 148 provides the environment specification for the 16 Gbps Fibre Channel SFP+
transceivers.
Operating Storage
SFP+ Maximum Minimum Maximum Minimum
FC 16Gb SW SFP+ 40° C 0° C 85° C -40° C
FC 16Gb 10km LW SFP+ 40° C 0° C 85° C -40° C
FC 16 Gbps Fibre Channel ELW SFP
+
40° C 0° C 85° C -40° C
Table 39. Environmental Specifications for 16 Gbps Fibre Channel SFP+ Transceivers
For information about safety, regulatory, and standards compliance, refer to IBM Systems Safety Notices.
General Specifications for 8 Gbps Fibre Channel SFP+ Transceivers
Table 40 on page 148 provides the general specifications for Fibre Channel SFP+ transceivers.
SFP+
Wavelength
(nanometer)
Fiber
Type Core Size (micon)
Baud Rate
(GBd)
Cable Distance
(meter)
850 MMF 62.5 2.125 150 m (492 ft) (OM1)
62.5 4.250 70 m (230 ft)
62.5 8.500 21 m (69 ft)
FC 8Gb SW
SFP+
50.0 (OM2) 2.125 300 m (984 ft)
Table 40. General Specifications for 8 Gbps Fibre Channel SFP+ Transceivers
148IBM Storage Networking SAN192C-6, SAN384C-6 and SAN768C-6: SAN192C-6, SAN384C-6 and
SAN768C-6 Installation, Service, and User Guide