IBM SAN192C-6 User Manual

Illustration Description Quantity
SFP Extractor 1 per kit
Not applicable Product Documentation
Pointer Card
1 per kit
Not applicable China Management Methods
Hazardous Substances
Content Table
1 per kit
Table 49. IBM c-type SAN Director Accessory Kit Contents(continued)
Note: If you do not receive any part listed in this document, contact IBM Support.
If you purchased this product through an IBM Business Partner, you may receive additional contents in
your kit, such as documentation, hardware, and power cables.
Each new switch ships with country-specific power cords. The shipped cords depend on your
specification when placing a switch order. The available power cords for the IBM c-type Directors are as
follows:
• AJK4 power cord, 250-VAC 16-A, Src Plug A, Australia
• AJK2 power cord 250-VAC 16-A, Src Plug GB16C, China
• AJJY power cord 250-VAC 16-A, Src Plug CEE, Europe
• AJJZ power cord 250-VAC 16-A, Src Pl, International
• AJK6 power cord 250-VAC 16-A, Src Plug SI16, Israel
• AJK0 power cord 250-VAC 16-A, Src Plug EL, South Africa
• AJK1 power cord 250-VAC 16-A, Src Plug SEV 5, Switzerland
• AJJW power cord 250-VAC 16-A, Src Plug NE, US and Japan
• AJJX power cord 250-VAC 16-A, Src Plug NE, US and Japan
• AJK3 power cord 250-VAC 16-A, Korea, Src Plug
• AJK5 power cord 125VAC 20A NEMA 5-20 Plug, North America/Japan
• AJK7 power cord 250VAC 16A, Argentina, Src Plug IR2073-C19
• AJK8 power cord 250VAC 16A, Brazil, Src Plug EL224-C19
• AJJV cabinet jumper power cord, 250 VAC 16A, C20-C19 Connector
162IBM Storage Networking SAN192C-6, SAN384C-6 and SAN768C-6: SAN192C-6, SAN384C-6 and
SAN768C-6 Installation, Service, and User Guide

IBM SAN192C-6 Specifications

General

Brand	IBM
Model	SAN192C-6
Category	Storage
Language	English