Chapter 4. Storage pools 181
The data is distributed across a single row. For simplification, not all packs are shown in
Figure 4-50.
Figure 4-50 Distributed RAID 6
Figure 4-51 on page 182 shows a single drive failure in the distributed RAID 6 (DRAID 6)
environment. Physical disk 3 failed and the RAID 6 algorithm is using the spare capacity for a
single spare drive in each pack for rebuild (which is marked in green). All disk drives are
involved in the rebuild process, which significantly reduces the rebuild time.
To Next Page
Loading...
Need help?
General