Installing or replacing the display panel assembly: 2076-92F
You can replace the display panel assembly in a 2076-92F expansion enclosure.
About this task
This task assumes that the following conditions were met:
⢠The expansion enclosure was moved out from the rack on the slide rails, as described in âRemoving an
expansion enclosure from a rack: 2076-92F â on page 83
⢠The top cover was removed, as described in âRemoving the top cover: 2076-92F â on page 46.
⢠The display panel assembly was removed, as described in âRemoving the display panel assembly:
2076-92F â on page 105.
Procedure
1. Remove the display panel assembly, which is shown in Figure 119 on page 108, from its packaging.
Chapter 2. Installing the system hardware 107