Figure 44. Detaching the inner rail section
4. Use four M4 screws to attach the inner rail to the side of the enclosure. Figure 45 on page 48 shows
the screw locations.
Figure 45. Screw locations to attach the inner rail to the enclosure
5. Install the inner section of the rail onto each side of the expansion enclosure, as shown in Figure 46 on
page 48.
Figure 46. Attaching the inner rail section to the enclosure
48
Storwize V7000 : Gen3 Quick Installation Guide for MTM 2076-724, 2076-U7B, 2076-12F, 2076-24F, and
2076-92F
To Next Page
Loading...
