IBM Storwize V7000 - Declared Noise Emissions for 2077-92 F, 2077-A9 F and 2078-92 F, 2078-A9 F SAS Expansion; Enclosures in Accordance with ISO 9296; Shock Testing Results; Vibration Testing Results

Figure 116. FIB parts removed from the chassis
5. If needed, repeat steps “2” on page 101 through “3” on page 102 to remove the other FIB.
Replace the fan interface board
6. To reinstall a fan interface board, or replace it with one from FRU stock, follow the procedure in
“Installing or replacing a fan interface board: 2076-92F ” on page 80.
Replacing an enclosure: 2076-92F
You can replace a faulty enclosure of a 2076-92F expansion enclosure with a new one from FRU stock.
Before you begin
DANGER:
Multiple power cords. The product might be equipped with multiple power cords. To
remove all hazardous voltages, disconnect all power cords. (L003)
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a
lifting device, or both to safely lift this part or unit. (C011)
Chapter 2. Installing the system hardware 103