b. Click Show advanced settings.
c. In the Privacy section, click Content settings.
d. In the Cookies section, select Allow local data to be set.
e. Click OK.
f. Refresh your browser.
3. Enable îłle download on IE 11 running on Windows 2012.
a. In Internet Explorer, click Tools > Internet Options.
b. On the Internet Options window, select the Security tab.
c. On the Security tab, click the Internet zone.
d. Click Custom level to customize the security level for this zone.
e. Scroll down to Downloads and select Enable under File download.
f. Click OK.
g. Click Yes to conîłrm.
h. Click OK to close the Internet Options window.
For Microsoft Internet Explorer (IE) 11 and Microsoft Edge running on Microsoft Windows 10, îłle
download is enabled by default and requires no additional conîłguration.
4. Enable scripts to disable or replace context menus (Mozilla Firefox only).
For Mozilla Firefox, complete the following steps:
a. On the menu bar in the Firefox browser window, click Tools > Options.
b. On the Options window, select Content.
c. Click Advanced by the Enable JavaScript setting.
d. Select Disable or replace context menus.
e. Click OK to close the Advanced window.
f. Click OK to close the Options window.
g. Refresh your browser.
Connecting an Ethernet cable to the technician port
Before you initiate the system, you must connect an Ethernet cable to the technician port on the
2076-724 control enclosure.
Before you begin
Procedure
1. Locate the technician ports on the control enclosure, as shown in the following îłgure:
Figure 148. Technician ports
Chapter 3.
Conîłguring the system 137
To Next Page
Loading...
