40000024-00000000 Flash of [arg1] from [arg2] failed for user [arg3].
Explanation: This message is for the use case where a user has not flashed the firmware component from the
interface and IP address due to a failure.
May also be shown as 4000002400000000 or 0x4000002400000000
Severity: Info
Alert Category: System - other
Serviceable: No
CIM Information: Prefix: IMM and ID: 0036
SNMP Trap ID: 22
Automatically notify Support: No
User response: Information only; no action is required.
40000025-00000000 The [arg1] on system [arg2] is 75% full.
Explanation: This message is for the use case where a Management Controller Event Log on a system is 75% full.
May also be shown as 4000002500000000 or 0x4000002500000000
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0037
SNMP Trap ID: 35
Automatically notify Support: No
User response: Information only; no action is required.
40000026-00000000 The [arg1] on system [arg2] is 100% full.
Explanation: This message is for the use case where a Management Controller Event Log on a system is 100% full.
May also be shown as 4000002600000000 or 0x4000002600000000
Severity: Info
Alert Category: System - Event Log 75% full
Serviceable: No
CIM Information: Prefix: IMM and ID: 0038
SNMP Trap ID: 35
Automatically notify Support: No
User response: To avoid losing older log entries, save the log as a text file and clear the log.
40000024-00000000 • 40000026-00000000
330
System x3650 M5 Type 5462: Installation and Service Guide
To Next Page
Need help?
General
