IBM System x3650 M5 User Manual

Replacing the LCD system information display panel
Use this information to replace the LCD system information display panel.
About this task
Removing the LCD panel assembly on a 3.5-inch model
To install the LCD panel assembly on a 3.5-inch model, complete the following
steps.
1. Read the safety information that begins on “Safety” on page vii and
“Installation guidelines” on page 283.
2. Turn off the server and peripheral devices and disconnect the power cords
and all external cables, if necessary.
3. Remove the top cover (see “Removing the top cover” on page 146).
4. Remove the fan cage assembly“Removing the fan cage assembly” on page
172).
5. ▌1▐Pull the tab on the LCD retention bracket to the left to disengage the
retention bracket. ▌2▐Rotate the retention bracket to remove it from the server.
6. Carefully insert the LCD system information display panel into place.
7. Hinge the retention bracket into the slot on the LCD panel assembly and
rotate it until it clicks into place.
Retention bracket
Figure 198. Retention bracket removal
LCD system information
display panel
Figure 199. LCD system information display panel installation
248 System x3650 M5 Type 5462: Installation and Service Guide

IBM System x3650 M5 Specifications

General

Brand	IBM
Model	System x3650 M5
Category	Server
Language	English