816f011b-0701ffff The connector [PhysicalConnectorElementName] configuration error has been repaired. (Front
USB)
Explanation: This message is for the use case when an implementation has detected an Interconnect Configuration
was Repaired.
May also be shown as 816f011b0701ffff or 0x816f011b0701ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0267
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only. Front Video :
816f011b-0c01ffff The connector [PhysicalConnectorElementName] configuration error has been repaired. (FP
LCD Cable)
Explanation: This message is for the use case when an implementation has detected an Interconnect Configuration
was Repaired.
May also be shown as 816f011b0c01ffff or 0x816f011b0c01ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0267
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f0125-0c01ffff [ManagedElementName] detected as present. (Front Panel)
Explanation: This message is for the use case when an implementation has detected a Managed Element is now
Present.
May also be shown as 816f01250c01ffff or 0x816f01250c01ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0390
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f011b-0701ffff • 816f0125-0c01ffff
Appendix A. Integrated management module II (IMM2) error messages 703
To Next Page
Loading...
