EasyManua.ls Logo

IBM System x3650 M5 - Page 717

IBM System x3650 M5
1010 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
816f010d-041effff The Drive [StorageVolumeElementName] has been enabled. (Drive 30)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d041effff or 0x816f010d041effff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-041fffff The Drive [StorageVolumeElementName] has been enabled. (Drive 31)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d041fffff or 0x816f010d041fffff
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010f-2201ffff The System [ComputerSystemElementName] has recovered from a firmware hang. (Firmware
Error)
Explanation: This message is for the use case when an implementation has recovered from a System Firmware
Hang.
May also be shown as 816f010f2201ffff or 0x816f010f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0187
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f010d-041effff 816f010f-2201ffff
Appendix A. Integrated management module II (IMM2) error messages 701

Table of Contents

Related product manuals