EasyManuals Logo

IBM x3630 M3 7377 User Manual

IBM x3630 M3 7377
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #251 background imageLoading...
Page #251 background image
Chapter 6. Configuration information and instructions
This chapter provides information about updating the firmware and using the
configuration utilities.
Updating the firmware
Important: Some cluster solutions require specific code levels or coordinated code
updates. If the device is part of a cluster solution, verify that the latest level of code
is supported for the cluster solution before you update the code.
The firmware for the server is periodically updated and is available for download
from the Web. To check for the latest level of firmware, such as server firmware,
vital product data (VPD) code, device drivers, and service processor firmware
complete the following steps.
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is described in this document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click System x.
3. Under Popular links, click Software and device drivers.
4. Click System x3630 M3 to display the matrix of downloadable files for the
server.
Download the latest firmware for the server; then, install the firmware, using the
instructions that are included with the downloaded files.
When you replace a device in the server, you might have to either update the
firmware that is stored in memory on the device or restore the pre-existing firmware
from a diskette or CD image.
v UEFI code is stored in ROM on the system board.
v IMM firmware is stored in ROM on the IMM on the system board.
v Ethernet firmware is stored in ROM on the Ethernet controller.
v ServeRAID firmware is stored in ROM on the ServeRAID adapter.
v SATA firmware is stored in ROM on the integrated SATA controller.
v SAS/SATA firmware is stored in ROM on the SAS/SATA controller on the system
board.
The following items are downloadable at http://www.ibm.com/systems/support/:
v Diagnostics programs
v IMM firmware
v Ethernet firmware
Important: To avoid problems and to maintain proper system performance, always
make sure that the UEFI code, service processor, and other firmware levels are
consistent for all System x3630 M3 servers.
© Copyright IBM Corp. 2014 233

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM x3630 M3 7377 and is the answer not in the manual?

IBM x3630 M3 7377 Specifications

General IconGeneral
Product FamilySystem x
Machine Type7377
Max Processors2
ChipsetIntel 5520
Memory Slots12 DIMM slots
ProcessorIntel Xeon 5600 series
MemoryUp to 192 GB
RAID SupportRAID 0, 1, 10, 5, 50
Network Interface2 x Gigabit Ethernet
Power SupplyHot-swap, redundant
Operating System SupportMicrosoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware

Related product manuals