11-9
11. ABOUT THE DV GATEWAY FUNCTION
Setting up the device
D When using the Internal Gateway function
Adding a call sign
1. Touch for 1 second.
Deleting a call sign
1. Touch the Call sign for 1 second to open the
QUICK MENU.
2. Touch “Add.”
3. Enter the Call sign, and then touch [ENT].
Allowed Call Sign List
Enter the call sign of the stations that you allow
to transmit through the Internet while “Enabled” is
selected for “Allowed Call sign (Access Point Mode).”
L You can add up to 30 call signs.
2. Touch “Delete.”
3. Touch [YES].
To Next Page
Loading...
