idp SMART-81 - Page 26

26
Model Mismatch Ribbon
recognize
Ribbon
recognize
Ribbon
recognize
Ribbon
recognize
recognize
error
model don’t match, press
key to retry ribbon
recognize
Ribbon Not Found Retry
Ribbon
recognize
Retry
Ribbon
recognize
Retry
Ribbon
recognize
Retry
Ribbon
recognize
Ribbon
recognize
error
If the ribbon and print
region don’t match, press
key to retry ribbon
recognize.
Region Mismatch
Ribbon Not Found Retry
Ribbon
recognize
Retry
Ribbon
recognize
Retry
Ribbon
recognize
Retry
Ribbon
recognize
Ribbon
recognize
error
If the ribbon and print
vendor don’t match, press
key to retry ribbon
recognize.
Vendor Mismatch
Ribbon Not Found Retry
Ribbon
recognize
Retry
Ribbon
recognize
Retry
Ribbon
recognize
Retry
Ribbon
recognize
Ribbon
recognize
error
If install not supported
ribbon, press key to retry
ribbon recognize
Unsupported Rib
Film Not Found Retry film
recognize
Retry film
recognize
Retry film
recognize
Retry film
recognize
Film recognize
error
film recognize error, film
is not installed or mis-
recognize, press key to
retry film recognize
Check Film
Film Not Found Retry film
recognize
Retry film
recognize
Retry film
recognize
Retry film
recognize
Film recognize
error
If the film and print
model don’t match, press
key to retry film
recognize.
Model Mismatch
Film Not Found Retry film
recognize
Retry film
recognize
Retry film
recognize
Retry film
recognize
Film recognize
error
If the film and print
region don’t match, press
key to retry film
recognize.
Region Mismatch
Film Not Found Retry film
recognize
Retry film
recognize
Retry film
recognize
Retry film
recognize
Film recognize
error
If the film and print
vendor don’t match, press
key to retry film
recognize.
Vendor Mismatch
Film Not Found Retry film
recognize
Retry film
recognize
Retry film
recognize
Retry film
recognize
Film recognize
error
If install not supported
film, press key to retry
film recognize.
Unsupported Film
Data Option Err Delete
spool and
Exit
Delete
spool and
Exit
Delete
spool and
Exit
Delete
spool and
Exit
Data option
error
Mag spool date transfer if
there is no Mag Encoder
Both side print data
transfer if there is no
Laminator.
Laminator spool data
transfer when Laminator
is not installed,
Combination of devices
(such as 300dpi transfer
when 600dpi / 600dpi
transfer when 300dpi)
and the spool data
option do not match,
press key to delete the
current spool.
Plz. PressAnyKey
Check Please.. Ribbon &
Film
research
Ribbon &
Film
research
Ribbon &
Film
research
Ribbon &
Film
research
Ribbon zero There is no ribbon
remaining. Ribbon must
be replaced. Press the
Ribbon Zero