1-10
7
ROCKY-6614 CPU Card
107
 Flow Control [None]
The Flow Control BIOS option reports the flow control method for the console redirection
application.

None
(Default) No control flow,

Hardware
Hardware is set as the console redirection

Software
Software is set as the console redirection
 Redirection After BIOS POST [Always]

Disabled
Turns off the redirection after POST

Boot Loader
Redirection is active during POST and during Boot
Loader

Always
(Default) Redirection is always active (Some OSes may not
work if set to Always)
 Terminal Type [ANSI]
The Terminal Type BIOS option allows you to specify the remote terminal type.

ANSI
(Default) The target terminal type is ANSI

VT100
The target terminal type is VT100

VT-UTF8
The target terminal type is VT-UTF8
 VT-UTF8 Combo Key Support [Disabled]

Disabled
(Default) Disables the VT-UTF8 terminal keys

Enabled
Enables the VT-UTF8 combination key. Support for
ANSI/VT100 terminals
5.3.10 USB Configuration
To Next Page
Loading...
Need help?
General
