IEI Technology ROCKY-6614 User Manual

1-19
2
CKY-6614 WSB- Card
192
IEI
®
Technology, Corp.
Step 2: The RAID BIOS must be configured.
Step 3: RAID drivers must be copied onto a floppy disk.Step 0:
E.2.2 Copy the RAID Driver
Before you attempt to configure the RAID on your system, you must copy the RAID driver
from the driver CD that came with your system onto a floppy disk. To do this, follow the
steps below.
Step 1: Insert the CD into a computer.
Step 2:
Open the “ROCKY Driver” CD directory.
Step 3: Open the RAID 304c directory (see Figure E-1).

IEI Technology ROCKY-6614 Specifications

General

Brand	IEI Technology
Model	ROCKY-6614
Category	Motherboard
Language	English