1-61
ROCKY-6614 CPU Card
61
WARNING!
When installing electronic components onto the CPU Card always take the
following anti-static precautions in order to prevent ESD damage to your board
and other electronic components like the CPU and DIMM modules
The following components must be installed onto the CPU Card or connected to the CPU
Card during the installation process.
 CPU

CPU cooling kit

DIMM modules
 Peripheral device connection
4.3.1 CPU Installation
4.3.1.1 CPU Selection: HT Functionality Requirements
Enabling Hyper-Threading Technology on your system requires meeting all of the platform
requirements listed below:
 CPU: An Intel® Pentium 4 Processor with HT Technology must be
installed
 Chipset: A chipset that supports HT Technology (that has been met by the
ROCKY-6614)
 OS: An operating system that has optimizations for HT Technology
4.3.1.2 CPU Installation
WARNING:
CPUs are expensive and sensitive components. When you install the CPU
be careful not to damage it in anyway. Make sure you install it properly and
ensure that a heatsink and CPU cooling fan is properly installed before you
run the CPU Card or else both the CPU and the board will be damaged.
To Next Page
Loading...
Need help?
General
