1-88
CKY-6614 WSB- Card
88
IEI
®
Technology, Corp.

LS-120
 LBA/Large Mode [Auto]
The
LBA/Large Mode
BIOS option allows you to disable or auto detect LBA (Logical Block
Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the
maximum drive capacity is 137 GB.

Disabled
This selection prevents the BIOS from using the LBA
mode control on the specified channel.

Auto
(Default) This option allows the BIOS to auto detect the LBA mode
control on the specified channel.
 Block (Multi Sector Transfer) [Auto]

Disabled
Selecting this option prevents the BIOS from using
Multi-Sector Transfer on the specified channel. The data to
and from the device will occur one sector at a time.

Auto
(Default) Selecting this value to allows the BIOS to auto detect the
device support for Multi-Sector Transfers on the specified
channel. If supported. Select this value to allow the BIOS
to auto detect the number of sectors per block for transfer
from the hard disk drive to the memory. The data transfer
to and from the device will occur multiple sectors at a time.

PIO Mode [Auto]
The PIO Mode option allows you to select the IDE PIO (Programmable I/O) mode program
timing cycles between the IDE drive and the programmable IDE controller. As the PIO
mode increases, the cycle time decreases.

Auto
(Default) This setting allows the BIOS to auto detect the PIO mode. Use
this value if the IDE disk drive support cannot be determined.
To Next Page
Loading...
Need help?
General
